Optimal cooling and guaranteed performance with the Watercooling Radiator Alphacool NexXxoS ST30 V2 - 240mm. Trust in the quality of Alphacool.
Alphacool is an internationally renowned company in the field of water cooling solutions for industrial and end customers. They constantly develop, innovate, and improve their products to ensure efficient cooling while maintaining an aesthetic appearance.
As usual, Alphacool uses pure copper for the NexXxoS V.2 radiators. The end chambers, water channels, and cooling fins are made of copper and represent a unique advantage worldwide. No other manufacturer uses pure copper for all these components. As a result, Alphacool radiators have been among the most popular and best on the market for many years. The perfect base for any water cooling system.
To maximize the performance of a radiator, Alphacool searches deep into the toolbox. Copper is the starting point. With a thermal conductivity of 400 W/(mK) for copper, compared to 236 W/(mK) for aluminium, the winner in this comparison is absolutely clear. The density of the fins is also chosen based on the user. Alphacool is one of the oldest companies in the water cooling field and has conducted countless tests in the lab. The result is a fin density of 15 FPI. This means that the airflow is only slightly obstructed so that air can circulate without high pressure; however, cooling capacity does not suffer. On the contrary. To make the most of the airflow, all cooling fins are equipped with small flaps. Some may know them from motorsport or aeronautics. The flaps are small wings that direct the airflow in the desired direction. In the case of the radiators, they measure barely 1 mm high, yet they allow for control over airflow turbulence to enhance cooling performance and minimize airflow noise.
All NexXxoS V.2 radiators rely on the new patented caps from Alphacool. Anyone who has mounted a radiator at the front or top of a case knows that protruding screw caps can ruin the aesthetics, as the radiator cannot be flush-mounted. Alphacool offers a solution with the new patented screw caps. They are fully inserted into the radiator and are flush with its surface. Thus, nothing obstructs a clean installation. Of course, the radiators also look much sleeker with the new locking screws.
All versions of the NexXxoS V.2 ST30 radiators feature two connections for IN and OUT, one on each side. On the side opposite the inlet/outlet, the NexXxoS V.2 ST30 radiators now have a filling or venting port. Of course, this connection can also be used to drain the water cooling loop. In any case, experienced users will be satisfied.
NexXxoS V.2 radiators are available in all common sizes. From the compact 120 mm ST30 radiator to the 480 mm radiator for those who can never get enough cooling performance. 140 mm fan enthusiasts won't be disappointed either, as Alphacool also covers all sizes from 140 mm up to the massive 420 mm XT45 radiator. And to take it to the extreme, there are ST30 and XT45 versions for all radiators. They differ simply by their thickness. ST30 corresponds to a thickness of 30 mm, XT45 to a thickness of 45 mm.
The NexXxoS V.2, like the previous NexXxoS radiators, offers special protection that prevents screws from penetrating the radiator when attaching fans or mounting the radiator to the case. Protective plates have been placed under all mounting holes to prevent screws from being screwed in too deeply. This protects the fins and cooling channels underneath.
Those who were satisfied with the previous NexXxoS radiators will appreciate the many small improvements that the NexXxoS V.2 radiators offer. Now, one of the best radiators has been made even better. Your system deserves it. WARNING: The NexXxoS V.2 radiators are only compatible with fittings that have a maximum thread length of 5 mm.
| Brand | Alphacool |
| Supplier reference | 14344 |
| Color | black |
| Color | Black |