Cristec Waterproof Battery Charger 2 Outputs AC/DC-IP65 Ypower 12V/20A

12V Chargers - IP65 POWER+
YPO12-20STPL-IP - 12V / 20A charger / 2 outputs - Fanless, Bluetooth, waterproof IP65

Chargers specifically designed for installation and use in a humid environment.

They share the same technical characteristics as the YPOWER+ chargers, plus they have a waterproof rating of IP65.

IP 65 YPOWER+

Chargers specifically designed for installation and use in a humid environment.

They share the same technical characteristics as the YPOWER+ chargers, plus they have a waterproof rating of IP65.

Supplied as standard with AC/DC wiring (1.8m)

SPRING 2025 RELEASE
Completely silent operation (fanless)

CRISTEC is the only manufacturer to offer chargers up to 12V 60A with natural convection (fanless). This advantage gives YPOWER+ chargers a completely silent operation and an optimized lifespan. Therefore, they can be installed anywhere on board, even in tough environments.

2 independent outputs

The YPOWER+ IP65 charger has 2 independent outputs.

Low energy Bluetooth application

YPOWER+ chargers are equipped with Bluetooth Low Energy (BLE), a variation of "classic" Bluetooth. The major advantage of BLE is its low energy consumption as it uses half the power of classic Bluetooth.

Thermal performance

The chargers can be fully charged up to +40°C

Protected against ignition

All models can be installed in the engine room as they are certified ISO8846, which protects against the ignition of flammable gases.

International compatibility

Automatic detection of the power supply network, from 90 to 265VAC and from 47 to 65Hz. You don’t have to worry about the voltage of the power network or generator.

5-stage charging curve

Boost: Quick recharge of batteries to 80%.

Absorption: Slow delivery up to 100%.

Floating: Maintenance charging.

Automatic update: prevents sulfation and revitalizes batteries, selection via the push button on the keyboard.

Reboost: New automatic Boost cycle if usage and battery status require it.

A regulated DC power mode is also available and YPOWER+ chargers can also be used as high voltage DC-DC converters with an input ranging from 121 to 375 VDC.

Custom charging

Custom and simultaneous charging of 3 battery banks. YPOWER+ chargers can be connected to different types of batteries simultaneously:

- Classic lead acid

- Sealed, gel or AGM

- Sealed spiral

Lithium Iron Phosphate (LiFePO4) battery with BMS. Selecting your battery technology

is easy thanks to the front panel keyboard.

Remote control

The chargers are equipped with CAN-Bus and a Bluetooth interface. Connection to an

NMEA network is also available via an optional adapter.