Cristec Waterproof Battery Charger 3 Outputs AC/DC-IP65 Ypower 12V/30A

12V Chargers - IP65 POWER+
YPO12-30STPL-IP - 12V / 30A Charger / 3 outputs - Fanless, Bluetooth, waterproof IP65

Chargers specifically designed for installation and use in a humid environment.

They retain the same technical characteristics as the YPOWER+ chargers with the added benefit of an IP65 waterproof rating.

IP 65 YPOWER+

Chargers specifically designed for installation and use in a humid environment.

They retain the same technical characteristics as the YPOWER+ chargers with the added benefit of an IP65 waterproof rating.

Comes standard with AC/DC wiring (1.8m)

SPRING 2025 RELEASE
Totally silent operation (fanless)

CRISTEC is the only manufacturer to offer chargers up to 12V 60A with natural convection (fanless). This advantage gives the YPOWER+ chargers completely silent operation and an optimized lifespan. They can therefore be installed anywhere on board, including in challenging environments.

3 independent outputs

The YPOWER+ IP65 charger has 3 independent outputs.

Low energy Bluetooth application

The YPOWER+ chargers come equipped with Bluetooth Low Energy (BLE), a variant of 'classic' Bluetooth. The major benefit of BLE is its low energy consumption, using half the energy of traditional Bluetooth.

Thermal performance

The chargers can operate safely with a full charge at temperatures up to +40°C

Protected against ignitions

All models can be installed in the engine room as they are certified ISO8846, which protects against the ignition of flammable gases.

International compatibility

Automatic detection of the power supply network, from 90 to 265VAC and 47 to 65Hz. You don’t have to worry about the voltage of the power grid or the generator.

5-stage charging curve

Boost: Rapid recharge of batteries to 80%.

Absorption: Slow charge return up to 100%.

Floating: Maintenance charging.

Automatic update: prevents sulfation and revitalizes batteries, selection via push button on the keypad

Reboost: New automatic Boost cycle if consumption and battery status require it.

A regulated DC power supply mode is also available, and the YPOWER+ chargers can also be used as high voltage DC-DC converters with an input ranging from 121 to 375 VDC.

Custom recharge

Custom and simultaneous recharging of 3 battery banks. The YPOWER+ chargers can be connected to different types of batteries simultaneously:

- Conventional lead-acid open

- Sealed, gel or AGM

- Sealed spiral

Lithium Iron Phosphate (LiFePO4) battery with BMS. Selecting your battery technology

is easy with the front keypad.

Remote control

The chargers are equipped with CAN-Bus and a Bluetooth interface. Connection to an

NMEA network is also available via an optional adapter.